Filter
Top Products
9
CE2.0 Crosstrainer
www.smoothfitness.co.uk
ASSEMBLY INSTRUCTIONS
First, remove the bolts (C4), washers (C5) and nuts (C6) from rear stabilizer (C). Insert two bolts (C4) through
the rear stabilizer (C) to attach it to the bracket at the back of the main frame (A). Then secure it with washers
(C5), spring washers (C6) and nuts (C7).
A. First remove the bolts (D7), washers (D8) and (D9) as well as nuts (D10) from the front stabilizer (D).
Insert two bolts (D7) through the front stabilizer (D) to attach to the bracket at the front of the main
frame (A). Then secure with washers (D8), spring washers (D9) and nuts (D10)
B. After you complete figure 1 & figure 2, if the machine does not sit level, you can adjust the end caps
(C2) to compensate for uneven floors.