Filter
Top Products
11
CE2.0 Crosstrainer
www.smoothfitness.co.uk
ASSEMBLY INSTRUCTIONS
Pull up right or left connect tube (A43) and
adjust the suitable position which 4 holes are
available when loosing the pop – pin the
middle tube (B) and lower tube (A43) will be
fixed securely
First move the bolts (G4), from the side
handlebar (G). Then slide the side handlebar
(G) over central support tube (B). Secure with
bolts (G4). During handlebar assembly you
have to use the holes as pictured in close up
view. Repeat step 1 and 2 on left connect tube
(A43)
Connect right side handlebar joint covers (H1
& H2) onto side handlebar (G) and secure with
screws (J3). Repeat step 1 on left side
handlebar joint covers