Filter
Top Products
12
CE2.0 Crosstrainer
www.smoothfitness.co.uk
ASSEMBLY INSTRUCTIONS
First, remove the bolts (B7) from the central
support tube (B) and remove the screw (F3)
from the handlebar (F). Connect cables (F5)
to sensor wires (B6). Connect the front
handlebars (F). Connect cables (F5) to
sensor wires (B6). Connect the front
handlebars (F) to central support tube (B)
and twist the bars together. Secure them
with two bolts (B7) and one screw (F3)
Connect right side pedal tube joint covers
(H3 & H4) onto pedal joints and secure with
screws (J2). Repeat again on left side pedal
tube joint covers. Assemble the right pedal
(H6) with washers (J4), spring washers (J5)
and star knobs (J6). There are 3 positions
for moving track. Repeat again on left pedal