Filter
Top Products
10
CE2.0 Crosstrainer
www.smoothfitness.co.uk
ASSEMBLY INSTRUCTIONS
First remove the bolts (B21), spring washers
(B14) and washers (B13) from the central
support tube (B)
Step 1 Connect the cable (B5) & (A15)
Step 2 Assemble the central support tube (B)
onto the main frame (A) with bolts (B21), spring
washers (B14) and washers (B13)
Attention:
When pushing the tubes together make sure
not to pinch cables.
Remove the screws (E4) from the back of the
monitor (E). Connect the sensor wire (B5 & B6)
with monitor wires and put the monitor on the
fixing plate.