Filter
Top Products
9
10.Identify the Left Handlebar (9), which is marked with a
sticker. Insert the Left Handlebar into one of the
Handlebar Legs (79);
make sure that the Handlebar
Leg is turned so the hexagonal holes are on the
indicated side. Attach the Left Handlebar with two
M8 x 45mm Button Bolts (50) and two M8 Nylon
Locknuts (46). Make sure that the Nylon Locknuts
are inside of the hexagonal holes. Do not tighten
the Button Bolts yet.
Assemble the Right Handlebar (not shown) and the
other Handlebar Leg (not shown) in the same way.
46
10
9
50
Hexagonal
Holes
79
9. Attach one of the Pedals (12) to the Left Pedal Arm
(14) with two M4 x 16mm Screws (66).
Attach the other Pedal (not shown) to the Right
Pedal Arm (not shown) in the same way.
14
12
66
66
9
8. Attach two Pedal Posts (16) to the Left Pedal Arm (14)
w
ith two M8 x 16mm Button Screws (84) and two M8
Washers (53).
Attach the other Pedal Posts (not shown) to the
Right Pedal Arm (75) in the same way.
8
16
14
8
4
53
75