Filter
Top Products
16
HOW TO CREATE A CUSTOM PROGRAM
1.
I
nsert the key into the console.
S
ee HOW TO TURN ON THE POWER on page
12.
2.
Select one of the custom programs.
To select a
custom pro-
gram, press
the Custom
Programs
button once
or twice, until
“P10” or
“P11” ap-
pears in the display.
Note: If the custom program has not yet been
defined, only three columns of indicators will
scroll across the matrix. If more than three
columns of indicators appear, see HOW TO
USE A CUSTOM PROGRAM on page 17.
3.
Press the Start button and program the desired
speed and incline settings.
A moment after you press the button, the walking
belt will begin to move. Hold the handrails and
begin walking.
See the ma-
trix in the
display.
Each cus-
tom program
is divided
into one-minute segments. One speed setting and
one incline setting can be programmed for each
s
egment. The speed setting for the first segment
will be shown in the flashing Current Segment col-
u
mn of the matrix. (The incline settings are not
shown in the matrix.) To program a speed setting
and an incline setting for the first segment, simply
adjust the speed and incline of the treadmill as de-
sired by pressing the Speed and Incline buttons.
Every few times a Speed button is pressed, an ad-
ditional indicator will appear or disappear in the
Current Segment column.
When the first segment of the program ends, the
current speed setting and the current incline setting
will be saved in memory.
The three columns of in-
dicators will then move one column to the left,
and
the speed setting for the second segment will be
shown in the flashing Current Segment column.
Program a speed setting and an incline setting for
the second segment as described above.
Continue programming speed and incline settings
for as many segments as desired; custom pro-
grams can have up to forty segments. When you
are finished with your workout, press the Stop but-
ton twice. The speed and incline settings that you
have programmed and the number of segments
that you have programmed will then be saved in
memory.
4.
When you are finished exercising, remove the
key from the console.
See step 8 on page 13.
Current Segment