Filter
Top Products
12
12. See the lower drawing. Position the Uprights
(53, 54) so that the Frame (51) is centered be-
tween them.
Firmly tighten the two M10 x 60mm Patch Bolts
(
1) and the four M10 x 75mm Bolts (2) (only one
side is shown). Be careful not to overtighten
the M10 x 60mm Patch Bolts. Raise the
Uprights (53, 54).
1
2
2
53, 54
1
53
51
54
Top View
13. Attach the Left Crosswalk Arm (117) and a
Plastic Spacer (119) to the Left Upright (53) with
two 1/4" x 3" Bolts (111) and two 1/4" Flat
Washers (114). Make sure that the Left
Crosswalk Arm is on the indicated side of
the Console (91).
Attach the Right Crosswalk Arm (not shown)
in the same way. Be careful not to pinch the
wires in the Right Upright (not shown).
111
114
13
53
117
119
91