Filter
Top Products
10
8. Remove the plastic ties from the Right Handrail
(33) and the Left Handrail (not shown). If neces-
sary, press the Cage Nuts (105) back into place.
W
ith the help of a second person, hold the
Console (91) near the Right Upright (54).
Connect the Wire Harness (39) to the console
wire. See the inset drawing. The connectors
should slide together easily and snap into
place. If they do not, turn one connector and try
again. IF THE CONNECTORS ARE NOT CON-
NECTED PROPERLY, THE CONSOLE MAY
BE DAMAGED WHEN THE POWER IS
TURNED ON.
Next, remove the wire tie from the Wire Harness
(39). Then, insert the connectors and the excess
wire downward into the Right Upright (54).
8
91
54
39
39
33
Wire
Tie
105
Console
Wire
Console
Wire
9. Start all six M8 x 15mm Bolts (8) with six M8
Star Washers (5) into the Uprights (53, 54).
Then, firmly tighten all six Bolts.
9
5
8
8
5
5
5
8
54
53
Plastic
Tie