Filter
Top Products
7
2. With the help of a second person, carefully tip
the treadmill onto its right. Partially fold the
F
rame (58) so the treadmill is more stable. D
o
not fully fold the treadmill until it is com-
p
letely assembled.
Insert the other Extension Leg (89) into the base
of the Uprights (84) as shown. Next, insert two
Extension Leg Bolts (64) into the bottom of the
Extension Leg, and firmly tighten the Extension
Leg Bolts.
.
58
8
64
2
3. Attach four Base Pads (82) to the base of the
Uprights (84) with four 1” Tek Screws (22).
With the help of a second person, carefully raise
the treadmill so that all four Base Pads (82) are
on the floor and the Upright (84) is in a vertical
position.
84
22
22
82
82
82
84
3
89
82
22
4. Have a second person hold the Handrail (20)
near the Uprights (84).
Insert the Upright Wire
Harness (77) into the hole in the bottom of the
Handrail and out of the top as shown.
Next, set the Handrail (20) on the Uprights (84).
Do not let the Upright Wire Harness (77) fall
into the right Upright.
Attach the Handrail (20) with four Handrail Bolts
(64) and four Star Washers (8); start all four
Handrail Bolts and then firmly tighten them.
84
20
8
8
77
64
84
64
4