17
THE INFORMATION MODE
T
he console features an information mode that keeps
track of treadmill usage information. The information
m
ode also allows you to select miles or kilometers as
the unit of measurement, to adjust the contrast of the
display, and to turn on and turn off the demo mode.
To select the information mode, hold down the Stop
button, insert the key into the console, and then release
the Stop button. When the information mode is se-
lected, the following information will appear in the dis-
play:
A number from 1
to 20 will appear
in the upper part
of the display.
This number is
the contrast set-
ting of the dis-
play; 1 is the lowest setting and 20 is the highest set-
ting. To change the contrast of the display, press the
weight increase and decrease buttons.
The center of the
display will show
the number of
hours that the
treadmill has
been operated.
The lower right
corner of the display will show the total number of miles
or kilometers that the walking belt has moved.
In addition, an “E” for English miles or an “M” for metric
kilometers will appear in the lower left part of the dis-
play. To change the unit of measurement, press the
Speed increase button.
Note: The console features a display demo mode, de-
signed to be used if the treadmill is displayed in a
s
tore. While the demo mode is turned on, the console
will function normally when you plug in the power cord,
s
witch the circuit breaker to the reset position, and in-
sert the key into the console. However, when you re-
move the key, the displays will remain lit, although the
buttons will not function. If the demo mode is turned on,
a “d” will appear in the lower right display while the in-
formation mode is selected. To turn on or turn off the
demo mode, press the Speed decrease button.
To exit the information mode, remove the key from the
console.
THE OPTIONAL CHEST PULSE SENSOR
An optional chest pulse sensor offers hands-free oper-
ation as it continuously tracks your heart rate during
your workouts.
To purchase the optional chest
pulse sensor, call the telephone number on the
front cover of the manual.