Precor UBK 615 Exercise Bike User Manual


 
18 Assembling and Maintaining the RBK 615 Recumbent Exercise Bike
Unpacking the Equipment
The shipping container for this exercise bike consists of the
following items:
Wooden pallet
Cardboard base
Cardboard cover
Foam spacers
WARNING
Do not attempt to move the equipment off of
the pallet by yourself. Have at least one other
person help you during this procedure, and use
safe lifting techniques.
To unpack the bike:
1. Cut the plastic straps securing the cover to the cardboard
base.
2. Lift the cover upward and set it aside.
3. Remove the plastic tape securing the loose parts in the
recesses of the foam spacers.
4. Remove the loose parts and set them down near the spot
where you plan to install the equipment.
5. While your assistant tilts the body assembly to one side,
pull the side and back foam spacers away from the other
side. Repeat this step to remove the spacers from the
opposite side of the body assembly.
6. While your assistant lifts the front of the body assembly,
pull the front spacer away from it. Set all of the removed
spacers aside.
7. With the help of your assistant, lift the body assembly and
move it to the location where you plan to install it.
8. Place the body assembly upright on the floor and remove
its plastic wrap. Keep it supported until you add the feet
and stabilizers later in this manual.