Precor UBK 615 Exercise Bike User Manual


 
20 Product Owner's Manual
Changing the Product Settings
You must be in the Programming mode before you can
change the settings.
To access the programming mode:
1. At the Precor banner, press the following keys in
sequence without pausing between selections:
RESET, 5, 6, 5, 1, 5, 6, 5
Note: A PAUSE/RESET key appears on some products
and functions the same as the RESET key.
The programming prompts appear sequentially and in a
menu format.
Figure 2: Keys used in programming mode
2. The following table describes how to use the keys to
navigate the programming mode menus.