Filter
Top Products
S3.19 Assembly and Maintenance Guide
page 24
1 2 3 4 5 6
C. For proper cable operation, the 3½-inch pulley,
located on the Mid-pulley Bracket, must be on the
same side as the Hi/Lo Pulley Assembly. If the
pulley is not on the correct side, reassemble it.
D. Feed the threaded end of the cable over the top of
the Mid-pulley Bracket’s 3½-inch pulley. Rest the
cable on the floor.
Important: Stand between the S3.19 and the Hi/Lo
Pulley Assembly and review the cable alignment.
The Mid Pulley Cable must fall behind the Mid-
pulley Bracket before wrapping around the Leg
Extension Floating Pulley. Refer to the illustration.
Step 10. Install Mid Pulley Cable and Hi/Lo Pulley Connection, continued
Mid-
Pulley
Bracket
D
C
Note the location of the Hi/Lo Pulley Assembly. The
3½-inch pulley, located on the Mid-pulley Bracket,
must be on the same side as the Hi/Lo Pulley
Assembly. Reassemble the pulley, if necessary.