Filter
Top Products
2: Pull Audio/Video and 12 Volt Power cable wires through hole in DVD bracket
and attach bracket to stand with 2 hex screws provided.
IMPORTANT: When attaching Short Version, confirm that the large
square opening on the rear of the bracket is positioned on the right
side of the stand tube as shown.
Short Version Long Version
3: Plug Audio Video cable into the Video & Audio “Output” on the rear of the
DVD player.
4: Plug 12 Volt Power cable into 12 Volt input on rear of DVD player.
5: Remove two security screws from top of DVD player.
Attach DVD player to bracket with 4 Phillips screws provided.
Short Version Long Version
Attach back cover with 4 Phillips
screws provided.
6