Filter
Top Products
page 4
C O M M E R C I A L P R O D U C T S D I V I S I O N
6. Take the following steps to secure the upright/console assembly to the base
of the treadmill:
a. Position the upright/console assembly so that both the right and left
handrail columns align over the column support mounts. Have an
assistant thread the round jacketed cable through the left side column
support as shown in Diagram 2.
CAUTION: Be sure not to crimp or pinch the cable as you place the
upright/console assembly into position. Cables pinched or other-
wise damaged by improper installation will not be covered by the
limited warranty.
b. Carefully lower the upright/console assembly onto the column support
mounts on the base frame (see Diagram 2).
c. Take the twelve bolts from the hardware kit and secure the upright/
console assembly to the base frame.
d. Finger-tighten each bolt. Using the hex key, alternately tighten the bolts
until all twelve bolts are secure against the upright/console assembly.
Diagram 2
Column support mount
Upright/console assembly
Base frame
Round jacketed cable
Bolt holes
Security key (optional)