Filter
Top Products
page 33
COMMERCIAL PRODUCTS DIVISION
In a course, This is what happens...,
you complete it Enter Cool Down. At the start of the cool-down period, the resis-
tance is reduced by 20 percent. You can adjust the setting using
the numeric or RESISTANCE ▼▲ keys. The display features
remain, so you can review your workout statistics.
Note: A cool-down period is appended to those courses that
have a finite duration. If you do not enter a workout time
during the Setup prompts, or the club has set “no limit” as the
default duration, then a cool-down period does not occur when
you reach the end of a course.
you press RESET Enter the WORKOUT SUMMARY mode. You can scan through
the workout statistics by pressing the CHANGE key. Note that
the TIME display shows the accumulated workout time includ-
ing warm-up and cool down periods.
no pedaling Enter Pause mode. PEDAL FASTER appears on the display
or slow pedaling and TIME stops accruing. Refer to page 23.
is detected
In Pause
mode, you This is what happens...,
resume pedaling Returns to the course and the workout statistics continue from
where you left off.
press RESET Exits the course and returns to the banner or blank display.
exceed time limit The C846 exits Pause mode, resets the displays, and shuts off.
In Cool down
mode, This is what happens...,
no pedaling Enter Cool-down, Pause mode. TIME stops accruing and
or slow pedaling PEDAL FASTER appears on the display. If you enter Pause
is detected mode, it is of limited duration. Check with club personnel or refer
to
Club Information
on page 15 and
Informational Displays Prior
to Shutdown
on page 23.
resume pedaling Returns to cool down mode.
you press RESET Displays the WORKOUT SUMMARY banner. See RESET above.
it ends. Displays the WORKOUT SUMMARY banner.
At the WORKOUT
SUMMARY
banner, you This is what happens,...
press RESET The workout statistics are reset to zero and, if you continue
pedaling, the Precor banner appears on the display.