Filter
Top Products
page 21
COMMERCIAL PRODUCTS DIVISION
At the user ID prompt, five zeros appear on the display. The blinking left zero
indicates that it is awaiting input. The following table provides information about the
keypad functions:
User ID Entry: Program Keys
▼ or ▲ moves the blinking LED from field to field.
Numeric keypad use the number keys to enter a user ID. The number that
is pressed appears in the display and the next field begins
to blink. When all five user ID numbers are selected, the
user must press ENTER to submit it.
ENTER submits the displayed user ID. Note that if the five zeros
are being displayed when the user presses ENTER, the
user ID entry is bypassed and the course prompt appears.
RESET resets the display to the Precor banner.
A message indicates when the user ID is accepted by the CSAFE master device.
Then, the course prompt is displayed. See
Quick Steps to Working Out
on page 31.
Note: If the user’s pedal speed drops below 20 revolutions per minute while using
the CSAFE device connection, a prompt PEDAL FASTER appears. If the pedal
speed remains below the 20 revolutions per minute threshold for the next twenty
seconds, the CSAFE connection is terminated. The word RESETTING appears
on the display while the C846 disconnects from the CSAFE device.
To review information about CSAFE specifications, visit the web site at:
www.fitlinxx.com/csafe
If you have questions or need technical support, refer to
Obtaining Service
on
page 7.