Filter
Top Products
page 26
COMMERCIAL PRODUCTS DIVISION
KEYS ON THE DISPLAY CONSOLE
The C846 has an easy-to-use keypad that is activated by the slightest touch.
Remind users that they only need to apply gentle pressure to these keys.
Each key on the display console’s keypad provides specific functions. Numeric
keys (numbered 1, 2, 3,... through 0) let the user enter data in answer to the
display prompts and change the course profile or resistance level during a work-
out. The standard keys, CHANGE, RESET, COURSE CHANGE ▲▼,
QUICKSTART, RESISTANCE ▼▲, and ENTER, let the user enter data as well as
control his or her workout.
The following information explains the different uses of the keys from left to right.
To locate each key, look at the display console or refer to Diagram 12.
R
E
S
I
S
T
A
N
C
E
C
O
U
R
S
E
C
H
A
N
G
E
Diagram 12
C846 Display and Keypad
KEYPAD TIPS
• If the optional battery recharger is not connected, the user needs to maintain
a pedal speed above 20 revolutions per minute before keypad entries can
occur. Refer to
Informational Displays Prior to Shutdown
on page 23.
• The Setup prompts need to be answered using the numeric keys or by pressing
the ▼ or ▲ keys. Accurate entries are required or features such as
SmartRate
®
will not work properly.
• Pressing ENTER selects the information being displayed.
• Pressing QUICKSTART bypasses further selections and prompts the user
to workout in Manual mode. Default values apply (see QUICKSTART on
page 28). The SmartRate
®
display does not appear.
• Pressing RESET returns to the Precor banner.