Filter
Top Products
EFX5.33 Elliptical Fitness Trainer Assembly Guide 2
Thank you for choosing Precor. For proper installation, please read
this guide thoroughly and follow the assembly instructions. If you do
not assemble the EFX according to these guidelines, you could void
the Precor Limited Warranty.
Obtaining Service
You should not attempt to service the EFX except for maintenance
tasks described in the owner’s manual. Should you need more
information regarding Customer Support numbers or a list of
Precor authorized Service Centers, visit the Precor website at
www.precor.com.
Unpacking the Equipment
The EFX is carefully tested and inspected before shipment. The unit
unpack and assemble the EFX.
Required Tools
• Wire tie cutter
• Phillips-head screwdriver
•Two ⁹⁄₁₆-inch wrenches (crescent and combination)
• SAE Standard socket set with socket extension
Installation Requirements
Follow these installation requirements when assembling the unit:
• Assemble the unit near the location where you plan to use it.
• Provide ample space around the unit.
Open space around the unit allows for easier access.
• Set up the unit on a solid, flat surface.
A smooth, flat surface under the unit helps keep it level. A level
unit has fewer malfunctions.
• Open the box and assemble the components in the sequence
presented in this guide.
• Leave room for adjustments.
Tighten fasteners (bolts, nuts, and screws), so the unit is stable,
but leave room for adjustments. Do not fully tighten fasteners until
instructed to do so.
is shipped in one box. Ask for help from two or more people to