Filter
Top Products
Chapter 2- QSX Overview
QSX Equipment Overview
There are two basic versions of the QSX. The QSX 400 is designed to work in
environments without a conference phone or with Polycom’s analog SoundStation,
SoundStation2, SoundStation Premier or SoundStation2W conference phones. The QSX
300 is specifically designed to work with the Polycom VTX 1000 conference phone. The
QSX 300 does not require a content controller because that functionality has been
designed into the VTX 1000 phone and can be accessed through the menus on the phone
itself.
QSX 400 Components
When sharing content between two QSX units, you will need one Polycom conference
phone connected to each QSX for the session. If only sharing content with web viewers,
it is not required to connect a phone to the QSX.
Name Component Description
QSX system base
Adds content sharing to phone
calls. The base can be mounted
on a rack, under a table, or on a
wall, or it can be placed on a
tabletop.
Content controller with 25-foot
(~8.5 meters) VGA Cable
Allows the presenter to send
content with the push of a button.
3 foot VGA Extension
Connects the QSX system to a
computer or other VGA source.
LAN Cable
Connects the QSX system to the
IP network.
Power Supply and Power Cable
Connects power to the QSX
system base.
8-wire cable for phone console
Connects the QSX system’s 8-
wire connector to the conference
phone.
Serial Cable (straight through)
Connects to the serial port on the
QSX. Used for setting static IP if
required and HyperTerminal is
not available.
Mounting Brackets
Includes screws and four brackets
for mounting the QSX system
base under a table or on a wall.
9