Filter
Top Products
C 64
Tips during the exercise
Swapping the bike setting (b0, b1 or b2)
Start from the Measuring mode. Press and hold the down button until Bike 1
or 2 or Bike OFF is displayed. You can now start exercising with the chosen
settings. For more information about cycling measurement, see the
“Measuring mode“ and “Swapping the displayed exercise information”
sections.
Resetting the trip distance
Start from the Measuring or Recording mode. Scroll up until Trip is displayed.
Press and hold the signal/ light button until the trip reading is zero. Release.
Returning to the manually set altitude
Start from the Measuring mode. Scroll down until altitude is displayed in
the middle row. Press and hold the signal/light button until the previous
manually set altitude is displayed.
If the manually set altitude reference value deviates over ±610 m/ ±2000 ft
from the altitude calculated by the wrist unit, Failed appears and the
measured altitude appears. Set the reference altitude from the Options
mode. As you start adjusting the reference altitude, the wrist unit suggests
a measured altitude for you instead of the previously set altitude.
Restarting the interval or recovery calculation
In the Recording mode press the stop button to pause the interval or
recovery calculation.
Start resetting by pressing and holding the down button. To restart the