Filter
Top Products
Buttons and Menu Structure
UP: Enter the menu and move
through selection lists, adjust values
OK: Confirm selections, select
training type or training settings
DOWN: Enter the menu and move
through selection lists, adjust values
BACK:
• Exit the menu
• Return to the previous level
• Cancel selection
• Leave settings unchanged
• With a long press, return to Time
view
LIGHT:
• Illuminate the display
• With a long press, enter quick menu in Time view (to lock buttons, set alarm or select time zone) or during
training (to adjust training sounds or lock buttons)
Symbols on the Display
The following table presents the display symbols and their descriptions.
Symbol Description
The battery of the training computer is low.
The alarm is active.
Sounds are off.
Time 2 is in use. Number two is displayed at the lower right corner of the
display.
You have one or more new messages.
The button lock is active.
The footpod is in use. If the symbol is blinking, the FT60 is trying to establish
a connection with the footpod.
The GPS sensor is in use. If the symbol is blinking, the FT60 is trying to
establish a connection with the GPS sensor, or the GPS sensor is trying to
establish a connection with the satellites.
Heart rate is transmitted.
ENGLISH
4 Get Started