Filter
Top Products
1. Thread two cable ties through the
passages of the bike mount. If you
install the bike mount on the
handlebar, thread the cable ties to the
opposite direction.
2. Insert the rubber part into the bike
mount. Make sure that it is firmly in its
nest.
3. Place the rubber part and the bike
mount on the stem/handlebar and
adjust the cable ties around the
stem/handlebar. Secure the bike
mount firmly. Cut off excess cable ties.
For a video tutorial, go to http://www.polar.com/en/support/video_tutorials.
Attach the Cycling Computer to the Bike Mount
1. Push the button and position the
cycling computer onto the bike mount.
2. Release the button to fasten the
cycling computer to the bike mount.
Check that the cycling computer is
fastened properly before you start
cycling.
To detach the cycling computer from the bike mount, push the button and lift the cycling computer off
the bike mount.
For a video tutorial, go to http://www.polar.com/en/support/video_tutorials.
ENGLISH
Getting Started 9