Filter
Top Products
50 – ENGLISH
7. CARE AND MAINTENANCE
Caring for Your Product
Like any electronic device, your Polar cycling computer
should be treated with care. The suggestions below will
help you to fulfi ll guarantee obligations and enjoy this
product for many years to come.
Wash the transmitter regularly after use with a mild soap
and water solution and a soft brush if needed. Do not dry
the transmitter with anything other than a soft towel.
Mishandling may damage the electrodes. Do not bend or
stretch the transmitter
. This may damage the electrodes.
Keep your cycling computer
, transmitter and sensors
in a cool and dry place. Do not keep them in a damp
environment, in non-breathable material (a plastic bag or
a sports bag) nor with conductive material (a wet towel).
The cycling computer,
transmitter and sensors are water
resistant, and can be used in rainy weather. To maintain
the water resistance, do not wash the cycling computer
or the sensors with a pressure washer or sink them under
water. Do not expose to direct sunlight for extended periods
such as by leaving it in a car or mounted on the bike
mount.
Keep your cycling computer clean. Clean the cycling
computer and sensors with a mild soap and water solution
and rinse them with clean water. Do not immerse them
in water. Dry them carefully with a soft towel. Never use
alcohol or any abrasive material such as steel wool or
cleaning chemicals.
Avoid hard hits to the cycling computer and speed sensor,
as these may damage the sensor units.