Polar CS100 Cyclometer User Manual


 
ENGLISH 31
5. SETTINGS
You can view or change the settings in the Settings menu.
Tip: Settings can also be confi gured using the Polar UpLink Tool™. They can then be transferred to your
cycling computer from your PC. For further information, see page 49.
To set values:
Adjust or select a value with the RIGHT button.
Accept your selection and proceed in the menu with the MIDDLE button.
Cancel your selection or return to the previous mode or menu by pressing the LEFT button.
5.1 RIDING DISTANCE FOR ESTIMATED TIME OF ARRIVAL FUNCTION AND
AUTOMATIC LAP RECORDING SETTINGS (CYCLING SET)
In the cycling settings you can make two different settings:
RideDist: Setting riding distance.
Set the distance you are going to ride and the cycling computer will estimate your arrival
time to the destination according to your riding speed.
AutoLap: Automatic lap recording.
Set the distance for the automatic lap and the cycling computer will record the lap
information every time you reach this distance. For example, if you set 1 km/m, the cycling
computer will record lap information every kilometer or mile.
Press MIDDLE
• Cycling SET
Press RIGHT
• Timer SET
Press RIGHT
• Limits SET
Press RIGHT
• Bike SET
Press RIGHT
• Watch SET
Press RIGHT
• User SET
Press RIGHT
• General SET