Polar CS100 Cyclometer User Manual


 
ENGLISH 33
5.2 TIMER SETTINGS (TIMER SET)
Your cycling computer is equipped with two alternating timers. The timers work during your exercise recording.
Tip: Use the timers for example as a reminder to drink at certain intervals or as a training tool in interval training, so that you know when
to switch from a harder to a lighter period and vice versa.
1. In the Time mode, press the RIGHT button until SETTINGS is displayed.
2. Press the MIDDLE button. Cycling SET is displayed.
3. Press the RIGHT button. Timer SET is displayed.
4. Continue by pressing the MIDDLE button and follow the steps below:
The display reads: Press the RIGHT button to set the fl ashing value Press the MIDDLE button to accept
the value
5. Timer 1
On / OFF
6. T
imer 1
On
RIGHT
• Turn the Timer on or off.
RIGHT
• Adjust the minutes (0-99 minutes).
RIGHT
• Adjust the seconds (0-59 seconds).
MIDDLE
(Skip step 6, if you turned the function off)
MIDDLE
MIDDLE
To set timer 2, repeat steps 5 and 6.
To return to the Time mode, press and hold the LEFT button.