Filter
Top Products
STEP 21:
FIGURE 21
29
• Route the LONG LEG PRESS CABLE around the 3-1/2” PULLEY on the PULLEY PLATES using one existing 3/8 X 1-3/4” BOLT
and one existing 3/8” LOCK NUT. See FIGURE 21.
0
1
2
345
6
1/2 1/2 1/2 1/2 1/2 1/2
BASE
FRAME
PULLEY PLATES
• Assemble the LONG LEG PRESS CABLE (from the 883 LEG PRESS OPTION box) to the PEDESTAL and route the LONG LEG
PRESS CABLE thru the BASE FRAME as shown in FIGURE 21. (NOTE: Remove pulleys for ease of installation.)
1
3/8 X 1-3/4”
LONG LEG
PRESS CABLE
• Route the LONG LEG PRESS CABLE around one previously removed 3-1/2” PULLEY and assemble to the bracket on the BASE
FRAME using one existing 3/8 X 1-3/4” BOLT and one existing 3/8” LOCK NUT. See FIGURE 21.
LONG LEG
PRESS CABLE
PULLEY