Filter
Top Products
SHORT LEG PRESS CABLE
FIGURE 2
STEP 2:
• Carefully remove and discard the SHORT LEG PRESS CABLE from the LEG PRESS as shown in FIGURE 2.
17
STEP 3:
FIGURE 3
• Remove the two 3/8 X 4-1/4” BOLTS, two 3/8 X 3-3/4” BOLTS, eight 3/8” WASHERS, PULLEY BRACKET and four 3/8” LOCK
NUTS from the REAR UPRIGHT and the BASE FRAME as shown in FIGURE 3.
3/8 X 4-1/4”
BOLTS
REAR
UPRIGHT
PULLEY BRACKET
THREADED HOUSING
3/8 X 3-3/4” BOLTS