Filter
Top Products
FIGURE 12
STEP 12:
0
1
2
345
6
1/2 1/2 1/2 1/2 1/2 1/2
• CAREFULLY remove the BOOM PLATE (10) from the the REAR UPRIGHT and the FRAME as shown in FIGURE 12. Discard the
BOOM PLATE.
FIGURE 13
STEP 13:
• Swing the GUIDE RODS (3) into the guide rod bushings in the LEFT BOOM BRACKET (2) as shown in FIGURE 13.
• SECURELY assemble the LEFT BOOM BRACKET (2) and the BOOM BRACKET to the REAR UPRIGHT and the FRAME using
the previously removed bolts, nylon spacers, washers and lock nuts as shown in FIGURE 13. (NOTE: The 2” NYLON SPACERS
go on the LEFT BOOM BRACKET only.)
3
2
23
BOOM PLATE
REAR UPRIGHT
FRAME
BOOM BRACKET
REAR
UPRIGHT
FRAME
2”
NYLON
SPACER
3”NYLON SPACER
2”NYLON
SPACER