Filter
Top Products
18
STEP 4:
FIGURE 4
• SECURELY assemble the STACK BASE (1) to the BASE FRAME using two 3/8 X 4” BOLTS (15), two previously removed 3/8 X
4-1/4” BOLTS, eight previously removed 3/8” WASHERS and four previously removed 3/8” LOCK NUTS as shown in FIGURE 4.
3/8 X 4” 15
3/8 X 4-1/4” BOLTS
BASE FRAME
1
STEP 5:
FIGURE 5
• Remove the SHORT LEG PRESS CABLE from the PULLEY PLATES and the PULLEY BRACKET as shown in FIGURE 5.
SHORT LEG PRESS
CABLE