Filter
Top Products
STEP 14:
FIGURE 14
14
• Route the LEG CABLE (8) around the 3-1/2” PULLEY on the PULLEY PLATES using one existing 3/8 X 1-3/4” BOLT and one
existing 3/8” LOCK NUT. See FIGURE 14.
• Securely assemble the threaded end of the LEG CABLE (8) to the THREADED HOUSING (24) then assemble the THREADED
HOUSING (24) to the bracket on the STACK BASE (1) using one 3/8 X 1-3/4” BOLT (13) and one 3/8” LOCK NUT (17) as shown
in FIGURE 14.
8
8
0
1
2
345
6
1/2 1/2 1/2 1/2 1/2 1/2
BASE
FRAME
PULLEY PLATES
• Assemble the LEG CABLE (8) to the PEDESTAL and route the LEG CABLE (8) thru the BASE FRAME as shown in FIGURE 14.
(NOTE: Remove pulleys for ease of installation.)
1
17
24
13 3/8 X 1-3/4”
PEDESTAL