Filter
Top Products
STEP 4:
FIGURE 4
7
• Remove the two 3/8 X 4” BOLTS, four 3/8” WASHERS and two 3/8” LOCK NUTS from the REAR UPRIGHT as shown in
FIGURE 4. Discard the 3/8 X 4” BOLTS.
3/8 X 4” BOLTS
STEP 5:
FIGURE 5
• SECURELY assemble the PULLEY L-BRACKET (16) to the REAR UPRIGHT using two 3/8 X 4-1/4” BOLTS (19), four
previously removed 3/8” WASHERS and two previously removed 3/8” LOCK NUTS as shown in FIGURE 5.
REAR UPRIGHT
19 3/8 X 4-1/4”
REAR UPRIGHT
16