Filter
Top Products
13
FIGURE 14
STEP 14:
• Carefully route the LEG PRESS CABLE (2) around one 3-1/2” PULLEY (4) and SECURELY assemble the 3-1/2” PULLEY (4) to
the bracket on the SEAT FRAME using one 3/8 X 1-3/4” BOLT (7) and one 3/8” LOCK NUT (6) as shown in FIGURE 14. Make
sure the CABLE is in the grooves of all the pulleys.
3/8 X 1-3/4” 7
2
6
SEAT FRAME
FIGURE 13
STEP 13:
12
SEAT FRAME
• SECURELY attach the BRACKET (from 100 LEG PRESS) to the SEAT FRAME using two 3/8” X 4-1/2” BOLTS (10), two 3/8”
WASHERS (5), and two 3/8” LOW HEIGHT LOCK NUTS (12). See FIGURE 13.
BRACKET
5
10
3/8 X 4-1/2”
4
3/8” LOW
HEIGHT