Filter
Top Products
FIGURE 15
STEP15:
• Carefully route the SHORT LEG PRESS CABLE (2) around one 3-1/2” PULLEY (4) and SECURELY assemble the 3-1/2”
PULLEY (4) to the SEAT FRAME using one 3/8 X 4-1/2” BOLT (10), two 3/8” FLANGE SPACERS (14), two 3/8 X 1” SPACERS
(13) and one 3/8” LOW HEIGHT LOCK NUT (12) as shown in FIGURE 15. Make sure the CABLE is in the grooves of all the
pulleys.
3/8 X 4-1/2” 10
4
2
12
13
MAIN ARM
FIGURE 16
STEP 16:
• Carefully route the SHORT LEG PRESS CABLE (2) around one 3-1/2” PULLEY (4) and SECURELY assemble the 3-1/2”
PULLEY (4) to the MAIN ARM using one 3/8 X 2-3/4” BOLT (8), two 3/8” FLANGE SPACERS (14) and one 3/8” LOCK NUT
(6) as shown in FIGURE 16. Make sure the CABLE is in the grooves of all the pulleys.
3/8 X 2-3/4” 8
4
2
6
14
3/8” LOW HEIGHT
LOCK NUT
14
14
SEAT FRAME