Filter
Top Products
11
STEP 10:
FIGURE 10
• SECURELY assemble the LEG PRESS ADAPTER (1) to the BASE FRAME using one 3/8 X 3-3/4” BOLT (9), one previously
removed 3/8 X 3-3/4” BOLT, two 3/8” WASHERS (5), two previously removed 3/8” WASHERS and two 3/8” LOCK NUTS (6) as
shown in FIGURE 10.
3/8 X 3-3/4” 9
BASE FRAME
6
1
5
FIGURE 11
STEP 11:
• SECURELY attach the 100 LEG PRESS to the LEG PRESS ADAPTER (1) using two 3/8” X 3-3/4” BOLTS (9), two 3/8” WASHERS
(5) and two 3/8” LOCK NUTS (6). See FIGURE 11.
1
6
5
9 3/8 X 3-3/4”
• Route the SHORT LEG PRESS CABLE (2) around one 3-1/2” PULLEY (4) and assemble the 3-1/2” PULLEY, PULLEY PLATE
(17) and one CABLE CLIP (11) to the PULLEY L-BRACKET (16) using one 3/8 X 1-3/4” BOLT (7) and one 3/8” LOW HEIGHT
LOCK NUT (12) as shown in FIGURE 10.
7 3/8 X 1-3/4”
4
11
17
12
16
2