Filter
Top Products
20
STEP 3:
FIGURE 3
• Remove the two 3/8” BOLTS, 3/8” WASHERS and 3/8” LOCK NUTS from the STACK BASE as shown in FIGURE 3.
STACK BASE
• SECURELY assemble the LEG PRESS ADAPTER (1) to the STACK BASE using the previously removed 3/8” BOLTS, 3/8”
WASHERS and 3/8” LOCK NUTS as shown in FIGURE 3.
3/8” LOCK NUT
3/8” WASHER
3/8” BOLT
1
FIGURE 4
STEP 4:
• SECURELY attach the 100 LEG PRESS to the LEG PRESS ADAPTER (1) using two 3/8” X 3-3/4” BOLTS (9), two 3/8” WASHERS
(5) and two 3/8” LOCK NUTS (6). See FIGURE 4.
1
6
5
9 3/8 X 3-3/4”