Filter
Top Products
3/8 X 1"1
FIGURE 6
;TEP 6:
¯ To assemble the BACK PAD (14) to the WOLFF SLEEVE (4), slide the two remaining HINGE TABS (9) over the PIN
WOLFF SLEEVE (ONE ON EACH SIDE) as shown in FIGURE 6, and SECURELY assemble each HINGE TAB (9) to
BACK PAD (14) using two 3/g X 1" BOLTS (15), two 3/8" LOCK WASHERS (20), and two 3/8" WASHERS (19).
SURE BOTH HINGE TABS ARE ALL THE WAY ON THE PIN)