Filter
Top Products
FIGURE 3
STEP 3:
¯ Insert four 2" SQ. END CAPS (33) into the BASE TUBES of the UPRIGHT FRAME (1) as shown in :FIGURE
¯
SECURELY assemble the BENCH FRAME (2) to the UPRIGHT FRAME (1) using two 3/8 X 3" BOLTS (17), one 3/8
4" BOLT (16), six 3/8" WASHERS (19), and three 3/8" LOCK NUTS (21) as sho~vn in FIGURE
¯
SECURELY assemble two 3/8" SPRING PIN ASSEMBLIES (25) to the SPRING PIN HOUSING on the UPRIGHT FRANIE (1)
as shown in FIGURE 3. (NOTE: !!!IMSPORT~MNT!!! Tighten the nut of the SPRING PIN ASSEM]~LY SECURELY!)
¯ Secure the WOLFF SLEEVE (4) in place with one THUM]3SCREW (29).
~
1/2 T
1/2 [
1/2 ]
1/2 ~
1/2 ]
6