Filter
Top Products
FIGURE 16
STEP 16
• If upon completion of assembly, the HEAD PLATE (20) does not sit on top of the first WEIGHT PLATE (58), push the HEAD
PLATE (20) down, insert the WEIGHT STACK PIN (34) and perform several repetitions at the press station. This will relax the cable
system and prevent the HEAD PLATE (20) from lifting up. See FIGURE 16.
• If after completing previous step, the HEAD PLATE (20) still does not sit on top of the first WEIGHT PLATE (58) or if there is
excess slack in the cable system, adjust the threaded end of the WEIGHT STACK CABLE (26) and the ADJUSTABLE GLIDE
(37) accordingly and retighten the jam nut. See FIGURE 16.
26
11
27
25
24
31
28
58
20
28
37
16
(Continued on next page)
6
PLATE
34
2