Filter
Top Products
MESSAGES
51
MESSAGE CAUSE CORRECTION
Storing on SD memory.
DO NOT REMOVE SD
ECG data is being written
(saved) to the SD memory card.
Wait until the message disappears.
Do not remove the SD memory card
until data storage has been
completed.
Copying SD memory.
DO NOT REMOVE SD
ECG data is being copied to the
SD memory card.
Wait until the message disappears.
Do not remove the SD memory card
until data copying has been
completed.
Data in device memory is being
erased.
ECG data stored on the unit is
being erased.
Wait until the message disappears.
Data in SD is being erased.
DO NOT REMOVE SD until
erasing finishes.
ECG data stored on the SD
memory card is being erased.
Wait until the message disappears.
Do not remove the SD memory card
until data erasing has been
completed.
Reading data...
DO NOT REMOVE SD.
The unit is loading ECG data
stored on the SD memory card.
Wait until the message disappears.
Do not remove the SD memory card
until the data has been loaded by the
unit.
No SD is inserted.
There is no SD memory card in
the card slot.
Turn off the power and insert the SD
memory card.
Never insert the SD memory card
while the power is turned on.
SD is write-protected.
The unit is unable to access data
because the SD memory card
inserted is write-protected.
Refer to the instruction supplied with
the memory card and insert the SD
memory card with write-protection
turned off.
No saved data.
The battery power has run low
and the ECG data stored on the
unit has disappeared.
Insert new batteries. Reset the Date
and Time and other settings. Any
ECG data that was stored on the unit
cannot be recovered.