Filter
Top Products
14
26. Press a 3/4Ó Round Inner Cap (34) into each end of
the two Pad Tubes (28).
Slide a Pad Tube (28) into the hole in the front leg on
the Base (8). Slide a Foam Roller (30) onto each end
of the Pad Tube.
Slide a Pad Tube (28) into the hole in the Leg Lever
(29). Slide a Foam Roller (30) onto each end of the
Pad Tube.
34
8
29
34
30
28
34
30
30
34
26
24. Press a 1Ó x 2Ó Inner Cap (43) into each end of the
Backrest Frame (15).
Attach the Backrest (41) to the Backrest Frame (15)
with four 1/4Ó x 3/4Ó Bolts (17).
Press a 3/4Ó Round Inner Cap (34) into each end of
the pad tube on the Backrest Frame (15).
Slide a Leg Foam Roller (74) onto each end of the
pad tube on the Backrest Frame (15). Note: The Leg
Foam Rollers are thinner than the four Foam Rollers
(30) used in step 26.
24
17
17
41
43
15
34
74
34
43
Pad Tube
74
25. Locate the Adjustment Knob (9) on the backrest tube
of the Main Upright (3). Unscrew the handle on the
Adjustment Knob until it is loose. Pull out the handle
as far as it will go and slide the adjustment tube on
the Backrest Frame (15) into the backrest tube.
Release the handle on the Adjustment Knob (9) and
let the Knob snap into one of the adjustment holes on
the Backrest Frame (15). Tighten the handle fully.
25
3
9
15
Adjustment
Holes
Backrest
Tube