Filter
Top Products
HOW TO USE THE MAINTENANCE MODE
The console features a maintenance mode that allows
you to access information and to view and change var-
ious default settings. Follow the steps below to use the
maintenance mode.
Insert the key into the console.
Refer to GETTING STARTED on page 14.
Hold down the ENTER AGE/WT button and the
RESET button simultaneously for two seconds
to select the maintenance mode.
When the maintenance mode is selected, the
words MAINTENANCE MODE will appear in the
main display.
Press the ENTER AGE/WT button to view the
total number of hours that the INCLINE
TRAINER has been used.
Press the ENTER AGE/WT button again to
view the total distance that the walking belt
has moved.
Press the ENTER AGE/WT button again and
set the delay time for the timeout mode.
Any time that the INCLINE TRAINER is not used
for several minutes, the console will enter a time-
out mode and the words PUSH ANY BUTTON TO
START A NEW PROGRAM will begin to scroll
across the main display. To set the number of min-
utes before the console will enter the timeout
mode, press the + and – buttons beside the
ENTER AGE/WT button. The delay time can be
from 1 to 15 minutes.
Press the ENTER AGE/WT button again and
set the program time for MOOSE TRACKS,
MOAB RIM, and TETON CREST programs.
The MOOSE TRACKS, MOAB RIM, and TETON
CREST programs can be set to last for 20, 30, or
40 minutes. To change the setting, press the +
and – buttons beside the ENTER AGE/WT button.
Press the ENTER AGE/WT button again and set
the program time for the SLICKROCK, SWITCH-
BACK, and ALTA ADVENTURE programs.
The SLICKROCK, SWITCHBACK, and ALTA AD-
VENTURE programs can be set to last for 20, 30,
or 40 minutes. To change the setting, press the +
and – buttons beside the ENTER AGE/WT button.
Press the ENTER AGE/WT button again to
check for controller errors.
If there are no controller errors, the words NO
CONTROLLER ERRORS will appear in the main
display. If there is a controller error, the name of
the error will appear in the main display. If this oc-
curs, press the RESET button. If the same con-
troller error appears repeatedly, call Customer
Care toll-free at 1-800-201-2109.
8
7
6
5
4
3
2
1
23