Filter
Top Products
NVS 6
MANUAL
Page 50
11 STORAGE AND SHIPMENT
11.1 The NVS 6 units should be stored in heated premises at
a temperature of +5 to +40
o
C and a relative air humidity of not in excess
of 80 %.
11.2 Maintenance of the units, while at store, shall be performed as
instructed in Section 10 of this Manual.
11.3 Perform preservation of the unit before placing it for prolonged
storage. The preservation is done by the use of lamination method
(the units are sealed in a polyethylene bags).
On the expiry of three years since preservation, the unit shall be
subject to repeated preservation.
11.4 The NVS 6 can be shipped by any type of transport and over
varied distances, provided proper packaging is in place.
During transportation the package that contains the case with
the unit shall be securely protected against shocks and dropping.
The case shall be placed in the package with the top cover directed
upwards and carefully fastened.
CAUTION: AVOID DROPPING THE PACKAGE WITH THE UNIT
DURING LOADING AND UNLOADING OPERATIONS.