Filter
Top Products
NVS 6
MANUAL
Page 18
5.5.6 Screwdriver (4), shown in Fig. 3.1, is meant for performing
necessary readjustments of mount (7) and also used when the helmet
standard casing is replaced.
5.5.7 For removing dust, moisture and dirt from the external
surfaces of the unit, use is made of cloth (11) shown in Fig. 3.1.
5.5.8 The rechargeable batteries included in the single set of spare
parts, serve for replacement of failed or exhausted batteries of the
independent power source. The rechargeable batteries are charged by
the use of a standard battery charging unit designed for charging the AA
type rechargeable batteries in accordance with the Manual furnished with
the charging unit.
5.6 The packaging components of the NVS 6 include the case and
the set of maintenance documents (the Manual and the Log Book).
5.6.1 The case, shown in Fig. 3.1, is used for storing and carrying
the NVS 6 set. The case is provided with side pockets, which are
fastened with a zipper. One pocket holds the LVC (low-voltage converter)
and the cables, and the other one is used for holding the mount,
counterweight and screwdriver. The inner pocket is intended for
accommodating the test pattern, cloths, spare dehydrator cartridge and
batteries or rechargeable batteries. The night-vision goggles and its
accessories are delivered sealed in a polyethylene film envelope, which is
packed in the case together with the casing and clamp. The case is
closed with a flap fastened with a zipper and a sticking fastener. The case
comes complete with a carrying strap.