Filter
Top Products
18
Mode
Display name
Distance
Speed
Azimuth
Elevation
Reticle
Target
selection logic
Cd 16
Display test
Cd 17
Compass calibration
Gating
GAt
Entrance into gating mode
Data
Recall
rEc
Recalls last 10 measurement sets
Data
Clearance
cLr
Clears all recorded data
Interface
format
-PC- or
PLGr
Selects PC or PLGR data format for output port
Empty field means the parameter is not measured in this mode, NC
means ‘no change’ to the measurement parameter setting
.
Once set, the mode parameter is stored in on-board memory and
will be kept current until reset in the Setup mode.
Choosing
Cd 16 in the Setup mode will cause all display
segments and indicators to flash for 8 seconds. Flashing can be
interrupted by pressing either button.