Filter
Top Products
POWER SWITCH
Located on the front panel at the base of the treadmill, the ON/OFF switch has two positions - "I" (one) for ON and "0"
(zero) for OFF.
IMMOBILIZING THE TREADMILL
The treadmill can be immobilized if necessary as follows: If the MESSAGE CENTER does not display "SELECT A
WORKOUT", press the STOP key twice until that prompt appears. Then, press and hold down the SPEED DOWN key
and press the STOP key. The MESSAGE CENTER displays "IMMOBILIZED". The immobilized treadmill cannot be oper-
ated, and it remains in this state across resets, power cycles, etc. The main motor and incline are disabled. To restore
normal operation, repeat the same key sequence: Press and hold down the SPEED DOWN key, and press the STOP
key. The MESSAGE CENTER displays SELECT A WORKOUT, indicating that the treadmill is ready for use.
10