Filter
Top Products
STEP 22:
FIGURE 22
• Assemble one 3-1/2” PULLEY (35) to the FOOT PLATE (L) using one 3/8 X 3” BOLT (8), two STEP SPACERS 11/16” (27)
and one 3/8” LOCK NUT (19). See FIGURE 22.
23
• Route the small ball end of the LOW CABLE (AN) around one 3-1/2” PULLEY (35) and assemble the PULLEY to the LEG
PEDESTAL (K) using two 3/8 X 3-3/4” BOLTS (6), two STEP SPACERS 1-1/16” (26), two 3/8” WASHERS (18) and two 3/8”
LOCK NUTS (19) as shown in FIGURE 22. (NOTE: The LOW CABLE (AN) should be routed over the retaining bolt as
• Assemble one 3/8 X 2-3/4” BOLT (9) to the FRAME (A) using two 3/8” WASHERS (18) and one 3/8” LOCK NUT (19).
See FIGURE 22. (NOTE: The LOW CABLE (AN) should be routed under the retaining bolt as shown in FIGURE 22.)