Filter
Top Products
STEP 20:
21
• Route the large ball end of the LOW CABLE (AN) around one V- PULLEY (37) and assemble the PULLEY to the FRAME (A) us-
ing two 3/8 X 3-3/4” BOLTS (6), two19/32” FLANGE SPACERS (28), two 3/8” WASHERS (18) and two 3/8” LOCK NUTS (19)
as shown in FIGURE 20.
• Route the small ball end of the LOW CABLE (AN) throught the BASE PLATES (C) and assemble two 3-1/2” PULLEYS (35) to
the BASE PLATES (C) using two 3/8 X 3-3/4” BOLTS (6), four 1” SPACERS (24) and two 3/8” LOCK NUTS (19). See FIGURE