Filter
Top Products
STEP 8:
• SECURELY assemble the PEC PLATE (O) to the BASE (B) using two 3/8 X 2-3/4” BOLTS (9), one 3/8 X 4” BOLT (5),
two 3/8” WASHERS (18) and three 3/8” LOCK NUTS (19) as shown in FIGURE 8.
FIGURE 8
11
• SECURELY assemble the LEFT (F) and RIGHT (G) PEC FLY ARMS to BASE (B) using two 1/2 X 3/4” BUTTON HEAD BOLTS
(15) as shown in FIGURE 8. (Note: Tighten this connection enough to remove excess play yet allow the PEC FLY ARMS
freely.)
• Assemble the LEG PEDESTAL (K) to the FRAME (A) using two RH CAPS (32), one 1/2 X 104mm BOLT (2), two 1/2” SHIM
WASHERS (13), and one 1/2” LOCK NUT (20). (Note: Tighten this connection enough to remove excess play yet allow the
LEG PEDESTAL to rotate freely.)
• Assemble two ROLLER PADS (AJ) to the LEG PEDESTAL (K) using one 3/4 X 17-3/8” TUBE (T) four PLASTIC WASHERS
(33)
STEP 9:
FIGURE 9