Life Fitness GS4 Home Gym User Manual


 
STEP 18:
FIGURE 18
19
• Route the PEC FLY CABLE (AP) around one 4-1/2” PULLEY (36) and assemble the 4-1/2” PULLEY (36) to the DOUBLE FLOAT-
ING PULLEY BRACKET (AA) using one 3/8 X 1-3/4” BOLT (11) and one 3/8” LOCK NUT (19). See FIGURE 18.
• Securely assemble the PEC FLY CABLE (AP) to the RIGHT PEC ARM (6) as shown in FIGURE 18.
• Assemble one 3-1/2” PULLEY (35) to the PEC PLATE (O) using one 3/8 X 3-1/4” BOLT (7), one “L” CABLE RETAINER (P)
and one 3/8” LOCK NUT (19). See FIGURE 18.(Note: Loop the PEC FLY CABLE (43) around the PULLEY prior to assem-
bling the PULLEY to the PEC PLATE.)
• Assemble one 3-1/2” PULLEY (35) to the PEC PLATE (O) using one 3/8 X 3-1/4” BOLT (7), one “L” CABLE RETAINER (P)
and one 3/8” LOCK NUT (19). See FIGURE 18.(Note: Loop the PEC FLY CABLE (AP) around the PULLEY prior to assem-
bling the PULLEY to the PEC PLATE.)
• Securely assemble the PEC FLY CABLE (AP) to the LEFT PEC ARM (G) as shown in FIGURE 18.
• Assemble two 3-1/2” PULLEYS (35) to the BASE PLATES (C) using one 3/8 X 5-3/4” BOLT (4), two PULLEY GUARD (Q)
and one 3/8” LOCK NUT (19). See FIGURE 18.(Note: Loop the PEC FLY CABLE (AP) around the PULLEY prior to assem-
bling the PULLEY to the PEC PLATE.)